## This guide will walk you through the steps to select or modify the outputs you wish to use during a consultation. This is useful if you want to generate documents different from your default outputs, for a specific session. 

**1. Navigate to the "Select Outputs" Button**

-   Open i-scribe. 
-   Look for the**"Select Outputs"** button on the bottom right of your interface. This is where you can manage settings for the current consultation.
-   Click on the "**Select Outputs"** button, shown by the red box on the right of screenshot below:
    - *The red box on the left of the screenshot below is for the "Default Outputs", e.g. the outputs you'd like to appear by default for a new patient.*

```image media="60"
```

**2. Choose the Outputs You Want**

-   Review the list of outputs that appears in the dropdown menu.
-   Click on the option you want to include for this session. Selected templates will be ticked, and sit at the top of the list under*Active.*

```image media="61"
```

**3. Deselect Unwanted Outputs**

-   If any outputs are pre-selected but not needed for this consultation, click on them to**deselect**. Deselected templates will no longer be ticked.

**4. Confirm Your Selections**

-   Ensure all necessary outputs are ticked. These outputs will be generated for this specific session, and will appear at the bottom of the main interface. 

```image media="62" caption="Screenshot 2025-01-17 at 3.10.33 pm"
```

**5. Continue with the Consult**

-   Once your selections are made, proceed with your consult as usual. The documents will be generated based on your updated selection.

The changes you make to the template selection during a consult apply**only to the current session.** When you click**New Patient** and start a new session, your**Default Outputs** will automatically reappear in the Consult Parameters section.